Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

Tankless Water Heater Installation in Olathe, KS from All Seasons Air Conditioning and Heating is a comprehensive service that covers sizing, fuel and venting logistics, local codes, and water quality to deliver continuous hot water with improved efficiency. Our process begins with a thorough site evaluation and precise sizing calculations, then addresses gas or electric fuel requirements, venting, and outdoor installation considerations for winter protection. The plan includes permits, detailed installation steps, commissioning, performance testing, and full documentation tailored to Olathe's climate and hardness challenges.

Schedule My Service

(785) 242-2602

Tankless Water Heater Installation in Olathe, KS

Installing a tankless water heater is a long-term upgrade that delivers continuous hot water, higher energy efficiency, and a smaller footprint compared with traditional tank systems. For homeowners in Olathe, KS, professional Tankless Water Heater Installation in Olathe, KS ensures the system is sized, placed, and commissioned correctly to handle local climate impacts, fuel availability, and municipal code requirements.

Why install a tankless unit in Olathe homes

Seasonal temperature swings in Olathe mean higher required temperature rise in winter months; correctly sized equipment avoids flow drops in cold weather.
Many Johnson County homes rely on natural gas, making gas-fired tankless units efficient and cost effective, while electric units remain a good option where gas is unavailable.
Hardness and mineral content in the area’s water can accelerate scaling; professional installation includes recommendations for water treatment and maintenance to protect the unit and maintain efficiency.

Common tankless water heater types and typical issues in Olathe, KS

Gas-fired condensing units: very efficient, require proper venting and condensate drainage.
Non-condensing gas units: simpler venting but lower efficiency.
Electric tankless units: require significant electrical capacity but simpler venting.
Point-of-use vs whole-house systems: point-of-use improves response time for a single fixture; whole-house units must be sized for simultaneous demand.

Common issues homeowners face:

Undersized units that cannot meet simultaneous demand, especially during cold Kansas winters.
Inadequate gas supply or electrical service for high-demand units.
Improper venting or condensate handling for condensing models.
Scale buildup from untreated hard water reducing flow and efficiency.

Site evaluation and load/sizing calculations

A thorough site evaluation includes:

Assessing current hot water demand: list simultaneous fixtures (showers, dishwasher, washing machine).
Measuring available fuel: gas meter capacity and pipe length or electrical panel capacity and breaker space.
Checking venting options and clearances, indoor vs outdoor unit placement, and freeze exposure for outdoor units.
Reviewing local code and permitting needs for the installation site.

Sizing basics (what your installer will calculate):

Determine required flow rate in gallons per minute (GPM) by adding expected simultaneous fixture flows (example values: shower 1.5 to 2.5 GPM, kitchen sink 1.0 to 1.5 GPM, dishwasher 1.0 to 1.5 GPM).
Calculate temperature rise: target outlet temp minus incoming groundwater temp. In Kansas, incoming water can be considerably colder in winter, increasing required temperature rise.
Convert to heating capacity using the industry formula: BTU/hr = GPM × temperature rise (deg F) × 500. This guides selection of gas BTU rating or electric kW.

Fuel and venting requirements

Gas units: verify gas line diameter, length, and meter capacity; many whole-house units require increased pipe sizing. Proper venting is critical: condensing units typically use PVC or polypropylene direct venting with condensate management; non-condensing units require metal venting with specific clearances.
Electric units: confirm available electrical capacity, dedicated circuits, and potential need for service upgrade to 240V multiple-phase or higher amperage service.
Outdoor installations: consider freeze protection and location clearances. In Olathe, occasional sub-freezing temperatures mean outdoor unit pipe and condensate protection or placing the unit in a protected enclosure.

Recommended brands and models (overview)

Reputable manufacturers commonly recommended for Olathe homes include Rinnai, Navien, Noritz, Bosch, Takagi, Rheem, and Stiebel Eltron. Model selection depends on fuel type, required GPM, efficiency preferences, and budget. Your installer will match brand and model to the site evaluation and sizing calculation.

Step-by-step installation overview

Pre-install inspection and permit planning to meet City of Olathe and Johnson County code requirements.

Remove existing water heater and prepare mounting or mechanical room area.

Install unit with appropriate support, clearances, and weathertighting for outdoor units.

Run water lines with isolation valves, pressure relief valve, and expansion tank if required by local code.

Make fuel connections: gas line sizing and leak testing, or electrical connections with correct breakers and wire sizing.

Install venting and combustion air components; set up condensate drain for condensing units.

Perform system purge, check for leaks, and verify proper water pressure and flow.

Commission unit: program control settings, set maximum temperature, and run simultaneous fixture tests.

Final inspection and documentation for local building inspections.

Permits, inspections, and expected project duration

Typical permits: mechanical, plumbing, electrical, and gas line permits as required. Olathe follows state and local codes; professional installers coordinate permit pulls and scheduling of inspections.
Inspections: rough-in and final inspections commonly required; gas and electrical work may require separate inspections.
Project duration: a standard replacement with minimal changes can often be completed in one day (4-8 hours). Projects requiring gas line upgrades, electrical service work, major venting changes, or new permit work may take 1-2 days or longer depending on inspection scheduling.

Commissioning, performance testing, and documentation

Verify outlet temperatures at multiple fixtures and measure flow rates to confirm expected GPM.
Check combustion performance and CO levels for gas units; inspect vent terminations and clearances.
Flush and purge to remove installation debris; test for pressure stability and leak-free connections.
Provide startup documentation: serial numbers, installed settings, maintenance recommendations, and warranty registration guidance.

Tips for maximizing efficiency and lifespan in Olathe

Install a water softener or scale-reducing device if household water is hard; regular descaling extends life and maintains efficiency.
Schedule annual maintenance: clean inlet filters, check burners or heating elements, and inspect venting and condensate drains.
Set water temperature to 120 F to reduce scald risk and energy use while maintaining comfort.
Insulate hot water lines to reduce heat loss and improve delivery time.
If installing an outdoor unit, add freeze protection measures like heat tape or a sheltered location to prevent winter damage.
Consider a recirculation solution or smart controller to reduce hot water wait times while conserving energy.

Tankless water heater installation in Olathe, KS requires careful attention to sizing, fuel and venting logistics, local codes, and water quality. A professional approach ensures reliable hot water, peak efficiency, and compliance with municipal requirements while addressing unique regional challenges like temperature extremes and water hardness.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.