Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

All Seasons Air Conditioning and Heating explains the full heating installation process for Richmond, KS homeowners, from pre-installation assessment and load calculations to commissioning and homeowner orientation. We cover why professional installation matters, describing common system types (gas furnaces, electric systems, heat pumps, and hybrids), and identifying typical installation issues. We outline our step-by-step workflow, safety and permit requirements, thorough testing and performance verification, homeowner training, robust warranties, and the long-term benefits of a professionally sized, properly installed heating system that performs reliably through Kansas winters.

Schedule My Service

(785) 242-2602

Heating Installation in Richmond, KS

Installing a new heating system is one of the most important home investments for Richmond, KS homeowners. With cold Kansas winters and occasional freeze events, a properly sized and professionally installed furnace, heat pump, or heater keeps your home safe, comfortable, and energy-efficient. This page explains the full process for Heating Installation in Richmond, KS—from pre-installation assessment and load calculations to commissioning, homeowner orientation, and ongoing maintenance—so you know what to expect and why each step matters.

Why professional heating installation matters in Richmond, KS

Richmond homes face wide temperature swings between hot summers and cold winters. Older houses common in this area often have aging ductwork, inconsistent insulation, or outdated equipment that reduces comfort and raises utility bills. A professional heating installation ensures your new system matches your home’s actual needs (not just the previous unit’s capacity), meets local code and safety requirements, and delivers reliable heat during prolonged cold spells.

Common heating system types for Richmond homes

Gas furnaces: Reliable for cold climates, high-efficiency models reduce fuel costs and are common in homes with natural gas service.
Electric furnaces and electric resistance heaters: Simpler installations where gas is not available; best for smaller spaces or supplemental heat.
Heat pumps (air-source, ductless mini-split): Efficient year-round options in moderate Kansas winters; modern cold-climate heat pumps can perform well even during colder days.
Packaged systems and hybrid setups: Combine furnace and heat pump for efficiency and backup heat when temperatures drop.

Common heating installation issues in Richmond, KS

Incorrectly sized equipment leading to short cycling or poor comfort
Undersized or leaky ductwork reducing system performance
Incompatible thermostat or control wiring
Inadequate combustion venting or unsafe gas connections in older homes
Lack of proper permits or noncompliance with Franklin County/Kansas codes

Pre-installation assessment and load calculations

A thorough pre-installation assessment is the foundation of a successful heating installation in Richmond, KS. Key steps include:

Home inspection: Evaluate insulation, window performance, duct layout, and existing ventilation.
Manual J load calculation: Calculate precise heating (and cooling) requirements based on square footage, orientation, insulation values, and local design temperatures for Richmond.
Duct and airflow evaluation: Measure static pressure and airflow to determine whether ducts need repairs or resizing.
Fuel and venting check: Confirm gas, electric, or propane availability and assess combustion air and venting clearances.
Safety review: Identify potential hazards like backdrafting, carbon monoxide risks, or deteriorated flue components.

Accurate load calculations prevent oversizing or undersizing. In Richmond’s climate, an appropriately sized system avoids rapid on/off cycles, improves humidity control, and extends equipment life.

Choosing the right furnace, heat pump, or heater

Selection should be based on:

Load calculation results and ductwork capacity
Fuel availability (natural gas vs electric vs propane)
Efficiency goals (AFUE for furnaces, HSPF/SEER for heat pumps)
Space constraints and installation location
Long-term operating costs and warranty coverage

Cold-climate heat pumps are increasingly viable in the Richmond area for homeowners prioritizing efficiency and lower operating costs, while high-efficiency gas furnaces remain a strong choice where gas service is available.

Professional installation steps

A professional heating installation typically follows this sequence:

Job preparation: Obtain necessary permits, schedule inspections, and order correctly sized equipment and materials.

System removal: Safely remove and dispose of the old unit, seal openings, and prepare the installation area.

Duct and infrastructure work: Repair or seal ducts, install proper venting, and upgrade gas lines or electrical service as needed.

Unit placement and mounting: Install the furnace, heat pump, or heater on approved supports with correct clearances.

Mechanical and electrical connections: Make gas, refrigerant, condensate, and electrical hookups per manufacturer specs and code.

Insulation and sealing: Insulate pipes and seal all duct connections to minimize heat loss.

Control integration: Install and wire compatible thermostats and smart controls when applicable.

Each step follows manufacturer instructions and local code requirements to ensure safety and long-term performance.

Safety, compliance checks, and permits

Compliance with local regulations in Richmond and Franklin County is essential. Typical safety checks include:

Combustion analysis and vent integrity testing for combustion appliances
Gas pressure tests and leak detection
Proper flue and vent clearances
Electrical bonding and circuit protections
Verification of permits and scheduling of required inspections

EPA-certified refrigerant handling is required for heat pump installations. These checks protect occupants and ensure your installation passes municipal inspections.

System testing, commissioning, and performance verification

Commissioning confirms the system operates as intended:

Measure and document temperature rise for furnaces
Verify airflow, static pressure, and duct balancing
Check refrigerant charge and reversing valve operation on heat pumps
Test safety controls, limit switches, and emergency shutoffs
Program thermostats for optimal comfort and efficiency
Perform a final walkthrough to confirm even room temperatures and quiet operation

A properly commissioned system will run efficiently, maintain comfortable indoor temperatures, and minimize breakdown risk during Richmond’s cold snaps.

Homeowner orientation and maintenance recommendations

After installation, a clear homeowner orientation ensures you can operate and maintain the new system:

Explain thermostat controls and recommended settings for comfort and efficiency
Show filter types and replacement intervals (replace or clean monthly to quarterly depending on type)
Demonstrate how to check vents and basic troubleshooting tips
Recommend annual professional Tune-Ups: pre-season heating inspections catch issues early, maintain efficiency, and preserve warranties
Advise on safety devices: carbon monoxide detectors and smoke alarms should be present and tested regularly

For Richmond homes, an annual furnace or heat pump Tune-Up before the heating season is especially valuable to avoid service issues during cold periods.

Financing and warranties for Richmond homeowners

Financing options and manufacturer warranties are commonly available for new heating system installations in Richmond, KS. Typical warranty components include:

Manufacturer base warranty for major components (varies by model)
Extended warranty options for parts and labor through dealers or third-party plans
Flexible financing programs designed to spread installation costs over time

Review warranty details and maintenance requirements to ensure coverage remains valid over the life of the system.

Long-term benefits of a professional heating installation

A correctly specified and professionally installed heating system delivers:

Improved comfort and consistent indoor temperatures
Lower utility bills through higher efficiency and fewer heat losses
Reduced breakdowns and longer equipment lifespan
Safer operation with proper venting and combustion checks
Compliance with local codes and easier resale value for your Richmond home

A careful approach—from load calculations to commissioning and maintenance—ensures your new heating system provides dependable warmth through Kansas winters and operates efficiently year after year.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.