Name: All Seasons Air Conditioning, Heating, & Plumbing
Address: 150 New Century Pkwy, New Century, KS, 66031, US
Telephone: (785) 242-2602
Price range: $-$$$

All Seasons Air Conditioning and Heating presents furnace installation in Lyndon, KS as a comprehensive, step-by-step service that ensures safe, efficient heating through careful load calculations, professional ductwork adjustments, and precise equipment selection. Our process covers pre-install assessment, various system types, proper venting, thorough safety inspections, commissioning, and a comprehensive post-install handoff with warranty guidance. We emphasize building science, local codes, quiet operation, and long-term efficiency, addressing common Lyndon-specific concerns and questions to help homeowners plan with complete confidence. This overview outlines expectations, timelines, and ongoing aftercare for your new system.

Schedule My Service

(785) 242-2602

Furnace Installation in Lyndon, KS

A properly sized, installed, and commissioned furnace is the single best investment to keep your Lyndon, KS home safe, comfortable, and energy efficient through cold winters. This page outlines the full furnace installation process so you know what to expect: home assessment and load calculation, recommended system types, ductwork evaluation and any necessary modifications, step-by-step installation, safety and code compliance, post-install testing and commissioning, warranty and maintenance handoff, plus common customer questions specific to Lyndon homes.

Why a professional furnace installation matters in Lyndon, KS

Lyndon experiences cold winters with occasional extended freezes. An undersized or poorly installed furnace leads to uneven heating, higher fuel bills, premature equipment failure, and safety risks like carbon monoxide. Professional installation ensures your system meets local heating demand, works safely with your home’s ducts and ventilation, and delivers the efficiency manufacturers promise.

Common furnace installation needs in Lyndon, KS

Replacement of an aging or inefficient furnace (upgrading to high-efficiency condensing models).
New installations for additions, remodeled basements, or new-build homes.
Conversion between fuel types (electric to gas or vice versa) or switching to a heat pump hybrid system for improved efficiency.
Ductwork upgrades where existing ducts are undersized, leaky, or poorly insulated for Kansas winters.
Installation of zoning or advanced controls to improve comfort in homes with uneven heat distribution.

Initial assessment and load calculation

A reliable installation begins with a detailed home assessment:

Review of home construction, insulation levels, window types, and orientation. Kansas wind exposure and older home penetrations are considered.
Measurement of conditioned square footage and room-by-room heat loss to perform a Manual J load calculation. This determines exact heating capacity required rather than relying on rule-of-thumb sizing.
Evaluation of existing fuel supply (natural gas availability or propane), venting options, and electrical capacity.
This step prevents common problems like oversized cycling or undersized systems that struggle in prolonged cold.

Recommended system types for Lyndon homes

High-efficiency gas condensing furnaces (AFUE 90%+) for homes with natural gas access — best for cold-climate performance and lower operating cost.
Two-stage or modulating furnaces to reduce temperature swings and save fuel during mild weather.
Heat pump systems paired with a furnace (dual fuel) for homes looking to maximize efficiency through shoulder seasons while retaining robust heat for the coldest days.
Electric furnaces for homes without gas or where ductless heat pumps are impractical.
Selection considers fuel availability, budget, existing equipment, and long-term efficiency goals.

Ductwork inspection and necessary modifications

Ducts are the backbone of heating performance. A thorough duct inspection includes:

Measuring duct sizing against airflow needs from the load calculation.
Locating and sealing leaks with mastic or UL-approved tape and insulating ducts in unconditioned spaces to reduce heat loss.
Identifying restricted returns, closed dampers, or undersized boots causing hot and cold spots.
Planning for any required transitions, plenums, or new return locations to balance pressure and airflow.
Many comfort complaints in Lyndon homes are resolved by simple sealing and balancing rather than changing the furnace.

Step-by-step installation process

Site preparation: Protect flooring, set up workspace, and coordinate utility shutoffs.

Safe removal: Disconnect and remove the old furnace and prepare venting and gas/electrical lines for the new unit.

Positioning: Set and level the new furnace on a proper platform or pad, maintaining required clearances for service and combustion.

Gas and fuel connections: Install or adapt gas piping to manufacturer and code standards, including pressure checks and shutoff valves.

Venting and combustion air: Install approved venting systems (direct vent, B-vent, or PVC for condensing units) and ensure adequate combustion air per code for safe operation.

Electrical hookup and controls: Connect power, fuses, and thermostat wiring; integrate zoning controls or smart thermostats as specified.

Duct and refrigerant work (if part of a split system): Reconnect ducts, test seams, and perform any necessary refrigerant handling in accordance with EPA requirements.

Condensate management: For condensing furnaces, install condensate drainage and trap to prevent backflow or freezing.

Final sealing and insulation: Seal all access panels and insulate ducts or piping that require it.

Safety, code compliance, and inspections

Installations comply with local building and fuel codes and industry standards. Key safety checks include:

Gas tightness testing and correct manifold pressure settings.
Venting integrity and proper termination clearances to prevent flue gas recirculation.
Combustion air verification in tightly built homes, which is critical in modern, well-insulated Lyndon houses.
Installation of or verification for carbon monoxide detection and smoke alarms to meet local requirements.
Ensuring accessible service clearances and appliance labeling per code.
Permits and inspections are coordinated with local authorities when required to ensure lawful, safe installation.

Post-install testing and commissioning

A thorough commissioning process confirms the system performs as intended:

Combustion analysis on gas furnaces to verify safe and efficient fuel burn.
Measurement of supply and return airflow, temperature rise, and system static pressures to confirm manufacturer specifications.
Thermostat calibration and zoning balance checks to achieve even comfort.
Verification of condensate flow, electrical loads, and operational sequencing.
Technicians document test results and explain operational features so you understand system behavior through Lyndon’s varying conditions.

Warranty, documentation, and maintenance handoff

After installation you receive manufacturer warranty details and a summary of service performed. A proper handoff includes:

Registration instructions for manufacturer warranties and explanation of what is covered.
Maintenance recommendations tailored to local conditions, such as annual pre-winter Tune-Ups, filter selection for pollen season, and duct cleaning timing.
Clear schedule and list of routine tasks (filter changes, visual checks) to preserve efficiency and warranty validity.

Common customer questions — quick answers

How long does installation take? Typical replacement installations are completed in one day; more extensive ductwork modifications or new venting can take longer.
Will my home be disrupted? Installers protect floors, isolate the workspace, and clean up at job end. Some noise and dust are normal during removal and hookup.
How will this affect my energy bills? Properly sized, high-efficiency furnaces reduce fuel use; duct sealing and correct airflow maximize savings.
Do I need permits? Most furnace installations require permits and inspections; a professional installer will handle this process.
How often should I schedule maintenance? At minimum, annual furnace inspections and cleaning before the heating season keep systems safe and efficient in Lyndon’s climate.

ConclusionA quality furnace installation in Lyndon, KS is a combination of precise sizing, correct equipment selection, careful ductwork work, strict adherence to safety codes, and thorough commissioning. When each step is handled professionally, your home will be safer, more comfortable, and more energy efficient through the cold months. Regular maintenance completes the lifecycle, protecting performance and warranty coverage over years of reliable service.

CLIENTS SAY ABOUT US

Customer Testimonials

Our clients frequently commend our swift and effective service. Regardless of whether it's a holiday or a regular day, we are committed to addressing their needs with professionalism and care. Our team is devoted to delivering top-notch solutions and ensuring a comfortable environment for all our customers.

We have been with All Seasons for about 10 years and completely trust their work. All of the technicians are clean and professional.

Linda C.

Have had good experiences with the team. We're on time, courteous, and even installed my Lennox AC system in the middle of a storm. Will use them in the future for all my house calls. They turned in for the extended warranty for me.

Jason G.

Very professional! They were able to come out last-minute to look at a furnace to salvage our home closing. They ordered the part quickly and worked with our schedule to get installation done. We will not use any other company going forward!

Rachel P.

They have been servicing us for over 10 years as well as purchase of new furnace and AC from them. They are very knowledgeable! Always prompt and fair on prices. Highly recommend this All Seasons.

Thomas R.

They arrived promptly, and worked very efficiently. Victor even explained what we can do to prevent the problem in the future. Thank you for a great service. I highly recommend them.

Angie W.

Amazing service with attention to detail. Was scheduled quickly for a water heater and got the heater installed same week. Very detailed notifications both text and email. I highly recommend Jason and his team.

Tara P.

J.P. came out for a service call this morning and he was efficient, kind, thorough, and profess. Absolutely one of the best service calls I’ve had. When he left I felt like I had a clear understanding of what we need going forward. When we are ready to replace our system, we will absolutely call All Seasons.

Shannon C.

They are very professional, polite and very helpful explaining how the app. works. They took the time to answer all of our questions. I would recommend them for any of your AC/Heating needs!🤩

Danielle T.

Zac, Victor, JP, and Julian were amazing to work with! They also replaced all the water lines and drains in our house. They had to work around the weather, but they kept a positive attitude. I would highly recommend All Seasons for your HVAC and plumbing needs!! Ron and Linda Sears

Linda S.

Turned my air on won't work. Called All Seasons, Jason came right out. Had to order new part, he came right out and installed part also did the spring maintenance at the same time. I have been with All Seasons for 8 years. Their personal are very helpful and courteous. Would recommend them for any heating , cooling and plumbing needs.

Vickie

LEAVE A REVIEW

VIEW ALL REVIEWS

Service Areas

Our service areas are designed to meet the diverse needs of our clients. We focus on delivering exceptional quality and ensuring customer satisfaction in every project we undertake.